ZX3-90PI / 藝威 EV 單12"無(wú)源全天候防水揚(yáng)聲器系統(tǒng) 

Electro-Voice ZX3-90PI - 600-Watt, weatherized, permanent installation, 12” two-way loudspeaker system, integral stand mount, 90 X 50 horn, Black

This item is BLACK.

The Electro-Voice ZX3-90PI is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 90x50° coverage angle, for wider coverage or shorter distances. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.

The ZX3-90PI cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

This speaker has water-resistant powder coated stainless steel grilles and waterproof glandnut input panels with SJO cable.

· 2-way 600-watt suspension P.A. speaker with 90x50° coverage for wider coverage or shorter distances

· High output, 131dB SPL capacity

· Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor

· 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil

· Rugged, high-tech polypropylene enclosure

· 3 suspension Anchor Plates, 10 M8 insert suspension points

Active or Passive Passive

Frequency Response -10dB:48-20,000Hz

Power Capacity 600W

Maximum Sound Pressure Level (SPL) 131dB

Nominal Sensitivity 97dB

Impedance 8 Ohms

Crossover 2KHz

Low Frequency Driver DVX3121, 12" (305mm) Driver

High Frequency Driver ND2, 1" (25.4mm) exit Neodymium

Enclosure Material Polypropylene Structural Foam

Input Connections Glandnut SJO cable

Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure

Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm)

Weight 43.7 lbs (19.8 kg)