用途：

用于擠制胎面、內胎、膠管等半成品，亦可用于供膠或電纜覆膠。

結構特點：

1、冷喂料橡膠擠出機是業已發展成熟了的技術，世界上90%的橡膠擠出機是冷喂料。

◆不需要熱煉機，可降低投資和生產成本。

◆可連續喂入恒定溫度和粘度的膠料，成品精度和均勻性高。

◆擠出機的安放在膠料準備車間無關，更適用沒有自己混煉車間的公司。

2、我公司開發冷喂料擠出機已具有20年之經驗。

◆螺桿及襯套均采用氮化鋼，并經氮化處理，耐磨損，自潔性好。

◆螺桿結構先進，并由數控銑床加工，精度高。

◆機身內套帶有螺旋通道，具有良好的熱傳導性能，喂料段裝有喂料輥。

◆減速機設計合理，加工精度高，并配有強制潤滑系統，噪音小，耐磨損。

◆直流電機拖動，可根據不同種類及粘度的膠料，選取擠出參數。

◆配有熱水循環裝置，自動控制各段溫度。

◆用途廣泛，更換機頭或螺桿可擠制各種不同橡膠制品。

APPLICATION:

The present machine is used for extruding such half-finished rubber products as tire tread,rubber pipe,inner tube,cable and feeding rubber,and etc.

GENERAL DESIGN AND FEATURE:

1.The cold feed extruder has been a ripe technology,90Kextruders in the world are cld feed.

◆Without warm-up mill for the extruder,so investment and production cost can be reduced.

◆Stationary temperature and viscidity rubber stock can be fed continuously,so high precision and homogeneity.

◆Mounting the extruder has nothing to do with the compound-prepairation workshop,more suitable for the company which hasn''t mixing one.

2.With its twenty years experiences in making cold feed extruder,Shenyang Rubber Machinery plant become a company with up-to date level.

◆The screw and liners all made of nitrided steel are nitrogenized,so resistance to wear enough and better self-cleaning.

◆The screw with advanced structure is machined withN.C.milling machine,so high precision.

◆Liners of the barrel with helical intake groolves had better heat conduction and feeding rolls are fixed at the feed zone.

◆Advanced reducer with a forced lubrication system,high working accuracy ,less noise and wear resistance.

◆It is driven by a D.C.motor,choose extrusion parameter according to diferent kinds of rubber stock and viscidity.

◆Each zone of the extrusion body can be automatically controlled with a hot water circulating unit.

◆More usres,the extrusion head or screw can be changed to extrude different kings of rubber stock.