- 供貨總量 : 不限
- 價格說明 : 議定
- 包裝說明 : 不限
- 物流說明 : 貨運及物流
- 交貨說明 : 按訂單
PPR水管連接?
PPR水管連接的方式主要采用的是熱熔。在進行熱熔連接前，要將管道的的兩端上的塵土及污漬清除掉。在用熔接機加熱管材的及管材的配件，當管材的極其的管件的熱熔深度及時間達到一定的要求后，可進行管材的熱熔焊接。?
PPR water pipe connectionThe main connection mode of PPR water pipe is hot melting. Before the hot-melt connection， the dust and stains on both ends of the pipe should be removed. When the welding machine is used to heat pipes and pipe fittings， when the hot-melt profundity and time of pipes and pipe fittings meet certain requirements， the hot-melt welding of pipes can be carried out.
ppr管安裝的小竅門·安裝完畢后的試壓工作，PVC管業代理，試驗壓力為工作壓力的1.5倍，且壓力值不得小于0.6MPa，測試時間約20-30分鐘。
·管材安裝要遵循“水走天”原則，避免后期維護損害管道。
·安裝過程中要及時封住管材開口處，避免雜物進入管道系統
Tips for PPR tube installation
·After installation，PVC管業， the test pressure is 1.5 times of the working pressure， and the pressure value shall not be less than 0.6MPa， and the test time is about 20-30 minutes.
·Pipe installation chould follow the principle of 'water goes to the sky' to avoid damage to the pipe during later maintenance.
·In the process of installation，PVC管業品牌， the opening of the pipe should be sealed in time to avoid impurities entering the pipe system
目前，法蘭連接中大的問題主要是法蘭本身不合格和法蘭連接不合格。
現在市場上銷售的一些法蘭存在的質量問題有：
①法蘭的鋼材不合格，耐壓強度較低，在使用若干個月或若干個年后，出現滲水。
②法蘭的螺栓孔外緣距法蘭的邊緣太小，廈門PVC管業，小于5mm，在螺栓緊固時，易使法蘭邊緣。
At present， the major problems in flange connection are the unqualified flange itself and the flange connection is unqualified.
Some of the quality problems of the flange sold in the market are as follows:
① The flange steel is unqualified and the pressure resistance is low. After several months or years of use， water seepage occurs.
② The outer edge of bolt hole of flange is too small from the flange edge， less than 5mm. When the bolts are tightened， it is easy to make the flange edge.
PVC管業代理-Gafloon卡弗龍-廈門PVC管業由臺州艾菲力塑膠有限公司提供。臺州艾菲力塑膠有限公司為客戶提供“塑料制品（不含塑料桶）,橡膠制品（不含橡膠桶）,閥門”等業務，公司擁有“Gafloon卡弗龍”等品牌，專注于塑料管等行業。，在浙江省臺州市三門縣西區開發區的名聲不錯。歡迎來電垂詢，聯系人：鄭總（Rainy）。同時本公司還是從事PPR管，地暖管，PVC管的廠家，歡迎來電咨詢。
